Single Measuring 30000 times after one time full charging. 104 76.5 41 mm.The laser range and Speed finder has two buttons: "Start" button. About 1 second and the device will start. Adjust the diopter to get a clear image in the eyepiece display. Turn the rotation of eyepiece left or right until the display is in focus. Shortly press "mode" button, the range finder will change between 2 modes.
Mode 1: Range mode: Measure straight line distance. Mode 2: Speed mode (Show " speed in LCD"). Show in the figure below. Key does not release it, then start the scan ranging the top left of the screen displays the scan character "SCAN" with the change of the target, the straight-line distance.O constantly refresh the display, release the key. Laser rangefinder will automatically power off in 20 second without operation. Long press the "MODE" button, Units of distance " M/Y" can be converted. G The points for attention. Battery life: Continuous operation about 30000 (room temperature), goal focus, measurement and automatic power-down is included in the single duty cycle. May vary depending on the other factors of the temperature the target shape, color. The multifunctional range finder does not emitted a visible It uses a, and from the selected target reflection, back to the optical receiver.
Non-destructive vision infrared pulse laser By measuring each pulse from the target and back, the laser rangefinder then uses its advanced diagnostic circuit to instantly calculate the measured distance. The maximum measuring range of the device depends o. N target reflectivity, colour, surface finish, size and actual shape.This item is in the category "Home & Garden\Tools & Workshop Equipment\Measuring & Layout Tools\Laser Measuring Tools". The seller is "ju251268" and is located in this country: CN. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Mexico, Canada, Australia.